Meat is a widely consumed food globally; however, variations in storage conditions along its supply chain can pose a potential food safety risk for consumers. Addressing this concern, we have developed freshness indicators designed to monitor the condition of packaged chicken. In this study, anthocyanins were infused with cellulose paper measuring 2 × 2 cm, and subsequent analysis focused on examining color changes concerning deteriorating chicken stored at 30°C for 48 h, with varying sample sizes being considered. The rise in total volatile nitrogen (TVB-N) compounds from an initial value of 3.64 ± 0.39 mg/100 g to 28.17 ± 1.46 mg/100 g acted as the stimulus for the color change in the indicator, simultaneously influencing the pH from the initial 7.03 ± 0.16 to 8.12 ± 0.39. The microbial load (aerobic plate count) of the chicken samples was also significantly increased. This collective shift in various parameters strongly suggests the occurrence of spoilage in chicken meat. The pH indicators exhibited a dark pink to red color for fresh chicken. As the chicken meat turned towards spoilage, the indicators changed to a dark blue and then a pale green color. FTIR spectroscopy results confirmed the presence of cellulose and anthocyanins. The FTIR analysis also validated the immobilization of plum anthocyanins within the cellulose paper and assessed their stability after 8 months of storage. Notably, the indicators demonstrated rapid sensitivity, showing a 20.5% response within one minute of ammonia exposure, which further increased to 29.5% after 3 min of exposure. The total color difference (ΔE) steadily rose in all the examined samples and also under various storage conditions. Overall, the indicators developed in this study exhibited a highly pronounced color transition, capable of distinguishing between fresh and spoiled chicken samples depending on the extent of spoilage and the specific day of observation.

Mustafa Ahmed

Ipsheta Bose

Nousheen

Swarup Roy

Development of Intelligent Indicators Based on Cellulose and Prunus domestica Extracted Anthocyanins for Monitoring the Freshness of Packaged Chicken

Polyurethanes (PUs) are versatile polymers used in medical applications due to their high flexibility and fatigue resistance. PUs are widely used for synthetic blood vessels, wound dressings, cannulas, and urinary and cardiovascular catheters. Many scientific reports indicate that surface wettability is crucial for biocompatibility and bacterial adhesion. The use of oxygen plasma to modify PUs is advantageous because of its effectiveness in introducing oxygen-containing functional groups, thereby altering surface wettability. The purpose of this study was to investigate the effect of the modification of the oxygen plasma of polyurethane on its biocompatibility with lung tissue (A549 cell line) and the adhesion of Gram-positive bacteria (S. aureus and S. epidermidis). The results showed that the modification of polyurethane by oxygen plasma allowed the introduction of functional groups containing oxygen (-OH and -COOH), which significantly increased its hydrophilicity (change from 105° ± 2° to 9° ± 2°) of PUs. Surface analysis by atomic force microscopy (AFM) showed changes in PU topography (change in maximum height from ∼110.3 nm to ∼32.1 nm). Moreover, biocompatibility studies on A549 cells showed that on the PU-modified surface, the cells exhibited altered morphology (increases in cell surface area and length, and thus reduced circularity) without concomitant effects on cell viability. However, serial dilution and plate count and microscopic methods confirmed that plasma modification significantly increased the adhesion of S. aureus and S. epidermidis bacteria. This study indicate the important role of surface hydrophilicity in biocompatibility and bacterial adhesion, which is important in the design of new medical biomaterials.

Kamil Drożdż

Monika Gołda-Cępa

Paulina Chytrosz-Wróbel

Andrzej Kotarba

Monika Brzychczy-Włoch

Improving Biocompatibility of Polyurethanes Apply in Medicine Using Oxygen Plasma and Its Negative Effect on Increased Bacterial Adhesion

The process of decellularization is crucial for producing a substitute for the absent tracheal segment, and the choice of agents and methods significantly influences the outcomes. This paper aims to systematically review the efficacy of diverse tracheal decellularization agents and methods using the PRISMA flowchart. Inclusion criteria encompassed experimental studies published between 2018 and 2023, written in English, and detailing outcomes related to histopathological anatomy, DNA quantification, ECM evaluation, and biomechanical characteristics. Exclusion criteria involved studies related to 3D printing, biomaterials, and partial decellularization. A comprehensive search on PubMed, NCBI, and ScienceDirect yielded 17 relevant literatures. The integration of various agents and methods has proven effective in the process of tracheal decellularization, highlighting the distinct advantages and drawbacks associated with each agent and method.

Dhihintia Jiwangga

Ferdiansyah Mahyudin

Gondo Mastutik

Juliana

Estya Nadya Meitavany

Current Strategies for Tracheal Decellularization: A Systematic Review

Antibiotic resistance is becoming more common, emphasising the demand for novel antibacterial treatments. The current investigation describes the green synthesis of graphene quantum dots (GQDs) using M. indica leaves and characterization via Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and ultraviolet-visible (UV-Vis) spectrophotometer. The results showed that GQDs are spherical in shape. In vitro antioxidant and antimicrobial studies indicate that the biological efficacy of synthesized GQDs was higher than the ethanolic leaf extract. GQDs exhibited the highest scavenging efficacy with lowest IC50 (half-maximal inhibitory concentration) value. However, antimicrobial study showed more inhibitory activity of GQDs against all screened microorganisms, i.e., Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Pseudomonas aeruginosa, and fungi, i.e., Aspergillus niger and Aspergillus flavus. Graphene quantum dots facilitate reactive oxygen species (ROS) which ultimately lead to antioxidant and antibacterial activity. This approach would provide an efficient alternate method for tackling microorganisms.

Pooja Kadyan

Ponnusamy Thillai Arasu

Sudhir Kumar Kataria

Graphene Quantum Dots: Green Synthesis, Characterization, and Antioxidant and Antimicrobial Potential

This project aims to create a 316L stainless steel coated with a biocomposite based on chitosan for use in the biomedical industry. To completely coat the material, the dip-coating technique was used to apply plain chitosan, chitosan nanosilver, chitosan biotin, and chitosan-nanosilver-biotin in that order. This coating’s surface morphology was investigated with field emission scanning electron microscopy (FESEM). Surface roughness, average size distribution, and 2D and 3D surface tomography were all investigated using scanning probe microscopy and atomic force microscopy (SPM and AFM). The Fourier transform infrared (FTIR) spectroscopy technique was used to quantify changes in functional groups. To evaluate the coated samples’ wettability, contact angle measurements were also performed. The chitosan (CS) + nanosilver, CS + biotin, and CS + biotin + nanosilver-coated 316L stainless steel showed roughness values of about 8.68, 4.21, and 3.3 nm, respectively, compared with the neat chitosan coating, which exhibits 12 nm roughness, indicating a strong effect of biotin and nanosilver on surface topography whereas the coating layers were homogenous, measuring around 33 nm in thickness. For CS + nanosilver and CS + biotin, the average size of agglomerates was approximately 444 nm and 355 nm, respectively. The coatings showed adequate wettability for biomedical applications, were homogeneous, and had no cracks. Their contact angles were around 51–75 degrees. All of these results point to the composite coating’s intriguing potential for use in biological applications.

Hanaa A. Al-Kaisy

Basma H. Al-Tamimi

Qahtan A. Hamad

Mayyadah S. Abed

Investigation of Roughness, Morphology, and Wettability Characteristics of Biopolymer Composite Coating on SS 316L for Biomedical Applications

Currently, a tissue-engineered trachea has been popularly used as a biological graft for tracheal replacement in severe respiratory diseases. In the development of tissue-engineered tracheal scaffolds, in vitro studies play a crucial role in allowing researchers to evaluate the efficacy and safety of scaffold designs and fabrication techniques before progressing to in vivo or clinical trials. This research involved the decellularization of goat trachea using SDS, H2O2, and their combinations. Various quantitative and qualitative assessments were performed, including histological analysis, immunohistochemistry, and biomechanical testing. Hematoxylin and eosin staining evaluated the cellular content, while safranin O-fast green and Masson’s trichrome staining assessed glycosaminoglycan content and collagen distribution, respectively. The immunohistochemical analysis focused on detecting MHC-1 antigen presence. Tensile strength measurements were conducted to evaluate the biomechanical properties of the decellularized scaffolds. The results demonstrated that the combination of SDS and H2O2 for goat tracheal decellularization yielded scaffolds with minimal cellular remnants, low toxicity, preserved ECM, and high tensile strength and elasticity. This method holds promise for developing functional tracheal scaffolds to address severe respiratory diseases effectively.

Priangga Adi Wiratama

Synergistic Effects of SDS and H2O2 Combinations on Tracheal Scaffold Development: An In Vitro Study Using Goat Trachea

About this journal

International Journal of Biomaterials publishes research on the theory, design, engineering, fabrication, and implementation of materials and devices for therapeutic or diagnostic use in biological systems.

Journal profile

Meet the editorial board

International Journal of Biomaterials maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.

Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

International Journal of Biomaterials - Table of contents 2024

International Journal of Biomaterials | Hindawi

title

International Journal of Biomaterials publishes research on the theory, design, engineering, fabrication, and implementation of materials and devices for therapeutic or diagnostic use in biological systems.

International Journal of Biomaterials