Research Article
Machining Characteristics Investigations of DSS-2205 Using RSM–ANN and Gray Relational Analysis
Table 1
Response table of process parameters.
| Levels | Cutting velocity (Vc /m/min) | Rate of feed (Fz / mm/rev) | Cutting depth (Dc / mm) | Tooltip nose radius (Rtip / mm) |
| −2 | 80 | 0.2 | 2.5 | 0.8 | −1 | 100 | 0.3 | 3.0 | 1.2 | 0 | 120 | 0.4 | 3.5 | 1.6 | 1 | 140 | 0.5 | 4.0 | 2.4 | 2 | 160 | 0.6 | 4.5 | 2.8 |
|
|