Research Article
Properties of 3D Printable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends and Nano Talc Composites
Table 5
Tensile properties of the blends and the composite 3D specimens and the commercial data
[
52–
58].
| No. | Materials | Horizontal | Vertical | Tensile strength (MPa) | Elongation at break (%) | Tensile strength (MPa) | Elongation at break (%) |
| 1 | 100/0 | | | | | 2 | 90/10 | | | | | 3 | 80/20 | | | | | 4 | 70/30 | | | | | 5 | 60/40 | | | | | 6 | 70/30-talc1 | | | | | 7 | 70/30-talc5 | | | | | 8 | 70/30-talc10 | | | | | 9 | 70/30-talc20 | | | | | 10 | 70/30-talc30 | | | | | 11 | 70/30-talc40 | | | | | 12 | PLA (Ultimaker) | 49.5 | 5.2 | — | — | 13 | ABS (Ultimaker) | 39.0 | 4.8 | — | — | 14 | PolyMax™ PLA (Polymaker) | 28.1 | 1.4 | — | — | 15 | PolyLite™ PLA (Polymaker) | 46.6 | 1.9 | — | — | 16 | PolyLite™ ABS (Polymaker) | 33.3 | 2.7 | — | — | 17 | ECOMAX® PLA (3DXTECH) | 56.0 | 8.0 | — | — | 18 | 3DXMAX® ABS (3DXTECH) | 42.0 | 10.0 | — | — | 19 | Innofil3D PLA (BASF) | 38.1 | 2.8 | 28.8 | 1.1 | 20 | Innofil3D ABS (BASF) | 29.3 | 3.7 | 6.5 | 0.7 |
|
|
Tensile properties of the commercial data, horizontal printed in x, y-axis and vertical printed in z-axis [ 52– 58]. |