Research Article
Study on Optimization of Pump Shaft Transmission System of Plastic Centrifugal Pump
Table 11
Structure and dimension of the pump shaft.
| Size code | Design basis | Can it be optimized? |
| d 1 | Match with impeller threaded hole | N | d 2 | Greater than the minimum design diameter of the pump shaft, according to the standard of relief groove | N | d 3 | Select the diameter reference shaft seal | N | d 4 | Refer to the bearing inner ring size | N | d 5 | 2∼4 mm larger than the bearing inner ring hole size | N | d 6 | Refer to the bearing inner ring size | N | d 7 | Refer to the dimensions of the through cover and sealing ring | N | d 8 | Cooperate with coupling | N | X 1 | The sum of X1 and X2 is the depth of the impeller thread hole | N | X 2 | According to the relief groove | N | X 3 | Greater than shaft seal length | Y | X 4 | Less than 1 mm of the bearing width | N | X 5 | According to the cantilever length equal to the support span | Y | X 6 | Less than 1 mm of the bearing width | N | X 7 | Greater than the thickness of the through cover | Y | X 8 | Cooperate with the coupling | N |
|
|