International Journal of Rotating Machinery

Table of Contents: 2006

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 071034

Numerical and Experimental Investigations of Steady Micro-Tip Injection on a Subsonic Axial-Flow Compressor Rotor

Xingen Lu | Wuli Chu | ... | Zhiting Tong
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 063214

Noise Source Identification of Small Fan-BLDC Motor System for Refrigerators

Yong-Han Kim | Bo-Suk Yang | Chang-Joon Kim
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 028487

Probabilistic Sensitivities for Fatigue Analysis of Turbine Engine Disks

Harry R. Millwater | R. Wesley Osborn
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 060234

Wake Turbulence Structure Downstream of a Cambered Airfoil in Transonic Flow: Effects of Surface Roughness and Freestream Turbulence Intensity

Qiang Zhang | Phillip M. Ligrani
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 079084

Clearance Analysis and Leakage Flow CFD Model of a Two-Lobe Multi-Recompression Heater

Ashish M. Joshi | David I. Blekhman | ... | Joseph C. Mollendorf
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 061690

Fault Diagnosis System of Induction Motors Based on Neural Network and Genetic Algorithm Using Stator Current Signals

Tian Han | Bo-Suk Yang | ... | Jae-Sik Kim
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 071302

Numerical and Experimental Study of Friction Damping Blade Attachments of Rotating Bladed Disks

D. Charleux | C. Gibert | ... | J. Dupeux
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 069521

Optical PIV and LDV Comparisons of Internal Flow Investigations in SHF Impeller

G. Wuibaut | G. Bois | ... | J. Y. Champagne
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 017079

Blade Tip Leakage Flow and Heat Transfer with Pressure-Side Winglet

A. K. Saha | Sumanta Acharya | ... | Chander Prakash
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 013807

Vibration and Dynamic Response Control of Nonuniform Composite Rotating Blades

Sungsoo Na | Liviu Librescu | ... | Gwon-Chan Yoon
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 093621

Rotordynamics of Turbine Labyrinth Seals with Rotor Axial Shifting

Jinxiang Xi | David L. Rhode
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 038595

Experimental Study of a Flexible Rotor and Its Dependency on the Rolling-Bearing Temperature

Jean-Jacques Sinou | Fabrice Thouverez
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 063756

Model and Stability Analysis of a Flexible Bladed Rotor

N. Lesaffre | J.-J. Sinou | F. Thouverez
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 017379

Experimental Study of a Radial Turbine Using Pitch-Controlled Guide Vanes for Wave Power Conversion

Manabu Takao | Yoshihiro Fujioka | ... | Toshiaki Setoguchi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2006
  • - Article ID 060193

Understanding the Influence of Pressure and Radial Loads on Stress and Displacement Response of a Rotating Body: The Automobile Wheel

J. Stearns | T. S. Srivatsan | ... | P. C. Lam
International Journal of Rotating Machinery
 Journal metrics
See full report
Acceptance rate13%
Submission to final decision86 days
Acceptance to publication16 days
CiteScore2.300
Journal Citation Indicator0.290
Impact Factor0.9
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.