International Journal of Rotating Machinery

Table of Contents: 2002

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 256563

Theoretical Analysis of Heat Transfer Through an Idealized Gas Turbine Blade Model with Thermal Barrier Coating

Orhan Aydin | Misao Iwata | ... | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 587498

Comparison of Mobility Method and Mass Conservation Method in a Study of Dynamically Loaded Journal Bearings

Biao Yu | Jerzy T. Sawicki
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 793081

Gear Fault Detection with Time-Frequency Based Parameter NP4

V. V. Polyshchuk | F. K. Choy | M. J. Braun
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 656870

Application of the Full Cavitation Model to Pumps and Inducers

Mahesh M. Athavale | H. Y. Li | ... | Ashok K. Singhal
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 981060

Steady Synchronous Response and Balancing of Rotor Systems with Residual Shaft Bow

Harold D. Nelson
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 678162

A Numerical Study on Passive Control of Shock Wave/Turbulent Boundary Layer in a Supersonic Compressore Cascade

J. I. Seo | S. D. Kim | D. J. Song
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 623296

Detailed Heat Transfer Distribution on the Endwall of a Trapezoidal Duct with an In-Line Pin Array

Jenn-Jiang Hwang | Chau-Ching Lu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 135184

Phase-Averaged Method Applied to Periodic Flow Between Shrouded Co- Rotating Disks

Shen-Chun Wu | Yau-Ming Chen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 413563

High-Pressure Annular Seal Leakage and Rotordynamics with Application to Turbomachinery

D. Rame Gowda | B. S. Prabho
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 341685

Effect of Prewhirl on the Performance of Centrifugal Compressors

Yousef S. H. Najjar | Saleh A. M. S. Akeel
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 348271

Unsteady Pressure Field Investigation of an Axial Fan—Blade Unsteady Pressure Field Measurement

C. Xu | R. S. Amano
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 729657

Unsteady Pressure Field Investigation of an Axial Fan—Inlet and Outlet Unsteady Pressure Field Measurement

C. Xu | R. S. Amano | R. Perez
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 398104

Development and Assessment of Hot-Film Sensor Technique for the Multistage Turbomachinery Environment

J. Prato | B. Lakshminarayana | N. Suryavamshi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 654546

Effects of the Transverse Curvature on the Statistics of Fully Developed Turbulent Flow in an Annular Pipe

Marcello Manna | Andrea Vacca
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 574931

Toward CFD-Based Correlations for Single-Stage High-Pressure Transonic Turbine Stage

Iyad Akel | Wagdi G. Habashi | Hany S. Moustapha
International Journal of Rotating Machinery
 Journal metrics
See full report
Acceptance rate13%
Submission to final decision86 days
Acceptance to publication16 days
CiteScore2.300
Journal Citation Indicator0.290
Impact Factor0.9
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.