International Journal of Rotating Machinery

Table of Contents

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 531643

Intermittent Flow Regimes in a Transonic Fan Airfoil Cascade

J. Lepicovsky | E. R. McFarland | ... | J. Hayden
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 739072

An Improved Integral Method for Prediction of Distorted Inlet Flow Propagation in Axial Compressor

Eddie Yin-Kwee Ng | Ningyu Liu | ... | Daniel Tan
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 386216

Effect of Film Injection Location on Local Heat Transfer Coefficient on a Gas Turbine Blade

Anant B. Mehendale | H. Wanda Jiang | ... | Je-Chin Han
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 458947

Two-Phase Air/Oil Flow in Aero-Engine Bearing Chambers – Assessment of an Analytical Prediction Method for the Internal Wall Heat Transfer

A. Glahn | S. Wittig
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 528936

A Numerical Study on Turbulent Couette Flow and Heat Transfer in Concentric Annuli by Means of Reynolds Stress Turbulence Model

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 965649

Performance Prediction of Cross-Flow Fans Using Mean Streamline Analysis

Jae-Won Kim | Eun Young Ahn | Hyoung Woo Oh
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 389698

On the Discrete–Continuous Modeling of Rotor Systems for the Analysis of Coupled Lateral Torsional Vibrations

Tomasz Szolc
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 8
  • - Article ID 847479

Comparison of the Flow Inside Whirling and Non-Whirling Smooth Annular Seals at 50% Eccentricity

Gerald L. Morrison | Mark C. Johnson | H. Davis Thames III
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 358548

Crack Detectability in Vertical Axis Cooling Pumps During Operation

N. Bachschmid | P. Pennacchi | ... | K. Aabadi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 1
  • - Article ID 407506

The Effect of Surface Roughness of a Body in the High Reynolds Number Flow

Tsutomu Adachi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 596891

A New Approach to Assess the Quality of Small High-Speed Centrifugal Fans Using Noise Measurement

Dingjun Cui | Ian A. Craighead
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 4
  • - Article ID 174851

Numerical Study for Optimizing Heat Transfer in High Speed Rotating Components

S. Wittig | S. Kim | ... | I. Weissert
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2
  • - Article ID 987852

A Numerical Analysis on Flow and Heat Transfer in the Entrance Region of an Axially Rotating Pipe

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 3
  • - Article ID 146971

Dynamics of Anisotropically Supported Rotors

Agnes Muszynska | Charles T. Hatch | Donald E. Bently
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 9
  • - Article ID 423094

Effects of Volute Design and Number of Impeller Blades on Lateral Impeller Forces and Hydraulic Performance

Daniel O. Baun | Ronald D. Flack
International Journal of Rotating Machinery
 Journal metrics
See full report
Acceptance rate13%
Submission to final decision86 days
Acceptance to publication16 days
CiteScore2.300
Journal Citation Indicator0.290
Impact Factor0.9
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.