Pulse Nd:YAG laser was used to polish DF2 cold work steel. Influence of irradiation parameters on the 3D
surface morphology was studied by 3D profilometer, scanning electron microscopy (SEM), and atomic force microscope (AFM). Results among the tests showed when DF2 specimens were irradiated with parameters of (i) laser input energy P=1 J, (ii) pulse feedrate=300 mm/min, (iii) pulse duration (PD) =3 milliseconds, and (iv) pulse frequency
W. M. Steen, Laser Material Processing, Springer, London, UK, 3rd edition, 2003.
K. Steinhoff, W. Rasp, and O. Pawelski, “Formation of paint surface on different surface structure of steel sheet,” Iron and Steel Engineer, vol. 74, no. 3, pp. 43–49, 1997.
View at: Google ScholarW. W. Duley, Laser Processing and Analysis of Materials, Plenum Press, New York, NY, USA, 1983.
G. Ryk, Y. Kligerman, I. Etsion, and R. Ryason, “Experimental investigation of laser surface texturing for reciprocating automotive components,” Tribology Transactions, vol. 45, no. 4, pp. 444–449, 2002.
View at: Publisher Site | Google ScholarS. Lugomer, Laser Technology: Laser Driven Processes, Prentice-Hall, Englewood Cliffs, NJ, USA, 1990.